Operating temperature: -20 ° C ÷ + 80 ° C
Switching frequency: 200 cycles / min Switching
point: selectable by pressing buttons P1 and P2
Intervention accuracy: 1% of full scale at 20 ° C
Value d 'hysteresis: can be set as desired on the whole scale

Adjustment range: from 1% to 100% of the full scale value
Weight: 0.43 Kg
Mechanical life: 10x106 cycles at 20 ° C
Body: in anodized aluminum, with parts in contact with fluid in AISI316 stainless steel, ceramic sensor and seal gasket in NBR
Installation: in any position on the panel through 2 through holes Ø5 mm; ¼ "BSP-F hydraulic connection
Display: 3 digits of 7.6 mm
Electrical characteristics:
- Max load: 0.5 A
- Contacts (NO + NC - NC + NC - NO + NO)
- Output signal 4-20mA combinable with contacts (only with
M12 connector)
- Electrical connection according to DIN43650, M3 standards
- Electrical connection according to IEC60947-5-2, M12
- Electrical protection according to CEI EN 60529, IP65
- Average consumption: <50 mA
- Power supply voltage: from 12 to 24 Volt
- Emissions and interference immunity according to EN 61.326
Warranty: see dedicated page
Spare parts: see dedicated page
Available:
- Special maximum pressures - Special
electrical connections
- Special hysteresis values
- CU-TR for Russian market
- Version with PSI display