Operating temperature: -20 ° C ÷ + 80 ° C
Switching frequency: 200 cycles / min Switching
point: The maximum switching point is found by pressing the “+ MAX” key; to decrease the value, use the “-MAX” key. The minimum pressure intervention point (hysteresis) is found by acting on both keys (MIN). The red LED, located above the setting keys, lights up every time a key is correctly pressed.
Intervention accuracy: ± 1% of full scale at 20 ° C
Hysteresis value:adjustable, between 2% and 90% of the set value (minimum hysteresis 2 Bar). By lowering the maximum pressure if the minimum pressure value is reached, the latter is automatically lowered while maintaining the minimum hysteresis.

Weight: 0.3 Kg
Mechanical life: 10x106 cycles at 20 ° C
Body: 30x30mm square in anodized aluminum
Parts in fluid contact: in AISI 316 L stainless steel with ceramic sensor and incorporated NBR seal.
Installation: in any position with ¼ "BSP-F
thread or Cetop flanged without the need for adapters
Electrical characteristics:
- Max load: 0.5 A
- Exchange contacts (Common, NO and NC) - SPDT
- Electrical connection according to DIN43650 standards , M4
- Electrical connection according to IEC60947-5-2, M12
- Electrical protection according to DIN40050, IP65
- Average consumption: 20 mA
- Power supply voltage: from 12 to 24 Volt
- Non-volatile memory EEPROM
Warranty: see dedicated page
Spare parts: see dedicated page
Available:
- Executions with adjustment range -1> 0 bar
- Special maximum pressures
- Special electrical connections
- Special hysteresis values
- CU-TR for the Russian market