Maximum working pressure (PS): 250-210-150 bar
Test pressure (PT): PS x 1.43 / 1.3 / 1.5
Body: in painted carbon steel
Standard nitrogen valve: ⅝ "UNF
Temperature d '' use (TS): from -20 ° C to + 80 ° C
Standard bag: suitable for mineral oils and non-aggressive fluids
Installation: horizontal / vertical (nitrogen valve upwards)
Compression ratio:
- recommended: P2 / P0 = 2.5
- maximum: P2 / P0 = 4
Mechanical life: the number of cycles is inversely proportional to the increase in the compression ratio. For use as a damper, the pre-charge pressure must be between 60% and 80% of the working pressure in consideration of the type of pump and the temperature value
Warranty: see dedicated page
Spare parts: see dedicated page
Available:
- Body painted internally and externally according to FOX standard procedure or according
to project specification
- Internal lining in different materials
- Bags in HNBR, EPDM, FPM
- Connection with SAE 3000 - SAE 6000, ANSI B16.5 or UNI / DIN flange
- Special connection on request
- LT Series for temperatures of - 40 ° C
- S Series for fluid separator
- Execution 310 Bar