Maximum working pressure (PS): 300 bar
Test pressure (PT): PS x 1,43 / 1,3 / 1,5
Body: in painted carbon steel
Standard nitrogen valve: ⅝ ”UNF
Operating temperature (TS ): -20 ° C ÷ + 80 ° C
Standard membrane: suitable for mineral oils and non-aggressive fluids
Installation: horizontal / vertical (nitrogen valve upwards)

Compression ratio:
- recommended: P2 / P0 = 2.5
- maximum: P2 / P0 = 6
Mechanical life: the number of cycles is inversely proportional to the increase in the compression ratio. For use as a damper, the pre-charge pressure must be between 60% and 80% of the working pressure in consideration of the type of pump and the temperature value.
Warranty: see dedicated page
Spare parts: see dedicated page
Available:
- Body painted externally according to FOX standard procedure or according to project specification
- Internal lining in different materials
- Membranes in HNBR, EPDM, FPM, HYTREL
- Connection with SAE 3000 flange - SAE 6000, ANSI B16.5 or UNI / DIN
- Special connection on request
- Series LT for temperatures of - 40 ° C
- Series M refillable with nitrogen valve M28x1.5
- Series V non refillable with
fixed pre- charge value established in the order phase
- Series S fluid separator
- Executions for high pressures
- Volumes up to 20 liters
HST membrane accumulator
HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator HST membrane accumulator
Download Step
Data sheet
Request a quote