Maximum working pressure (PS): Up to 50 bar
Test pressure (PT): PS x 1,43 / 1,3 / 1,5
Material: carbon steel
Operating temperature (TS): -20 ° C / + 80 ° C
Standard bag: polyurethane; suitable for mineral oils, fuels and non-aggressive fluids
Standard nitrogen valve: ⅝ "UNF or M28x1.5
Installation: vertical (nitrogen valve upwards)
Compression ratio:
- recommended: P2 / P0 = 2.5
- maximum: P2 / P0 = 4
Mechanical life: the number of cycles is inversely proportional to the increase in the compression ratio. For use as a damper, the pre-charge pressure must be between 60% and 80% of the working pressure in consideration of the type of pump and the temperature value
Warranty: see dedicated page
Spare parts: see dedicated page

Available:
- Body painted externally according to FOX standard procedure or according to project specification
- Bags in IIR, NBR, FPM, ECO
- Connection with SAE 3000 flange - SAE 6000, ANSI B16.5 or UNI / DIN
- Special connection on request
- HGX series in AISI 304L / 316L
- High pressure version up to 50 barg
- Volumes up to 5000 liters