Maximum working pressure (PS): 350 bar
Test pressure (PT) : PS x 1,43 / 1,3 / 1,5
Body: forged, sandblasted and painted steel
Standard nitrogen valve: ⅝ ”UNF
Operating temperature (TS): -20 ° C ÷ + 80 ° C
Standard bag: suitable for mineral oils and
non-aggressive fluids
Installation: horizontal / vertical (nitrogen valve
upwards)
Compression ratio:
- recommended: P2 / P0 = 2.5
- maximum: P2 / P0 = 4
Mechanical life: the number of cycles is inversely proportional to the increase in the compression ratio. For use as a damper, the pre-charge pressure must be between 60% and 80% of the working pressure in consideration of the type of pump and the temperature value.
Warranty: see dedicated page
Spare parts: see dedicated page
Available:
- Body painted externally according to FOX standard procedure or according to project specification
- Internal lining in different materials
- Bags in HNBR, EPDM, FPM
- Connection with SAE 3000 - SAE 6000 flange , ANSI B16.5 or UNI / DIN
- Special connection on request
- Execution with nitrogen / mushroom valve in stainless steel