Kenco Engineering
7000 Series Injection Rate Gauge
The 7000 Injection Rate Gauge is of the same construction as the 5700 Gauge but is provided with a spring-loaded test valve similar to the valve supplied on the 779 Drum Gauge. The test valve is used to isolate the chemical supply tank from the gauge to conduct a one minute calibration test for the chemical pump. The test valve has a 1/2″ coupler welded to the side for mounting the 7000 Gauge to the valve. The valve mounts in the 3/4″ outlet of a 55 gallon horizontal drum. The bottom connection for the chemical pump suction line is 1/4″ NPT. The test valve is available in either zinc plated carbon steel or 302/304 stainless steel. * NOTE: Kenco can provide custom scales to meet the calibration requirements of the 7000 level gauge. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory.
Product Website : https://kenco-eng.com/product/7000-series-injection-rate-gauge/
Document Info
7000 Series Injection Rate Gauge ManualSpare Parts
7000 Series Injection Rate Gauge Literature
Process Connections
Gauge • 1/2″ MNPT Test Valve • Tank Connection – 3/4″ MNPT • Pump Connection – 1/4″ MNPT Housing Material • C = Zinc Plated Carbon Steel • A = All Wetted Parts 316 Stainless Steel with 304 Stainless Steel Frame • W = All Wetted Parts 316 Stainless Steel with Zinc Plated Carbon Steel Frame Sight Tube Material • 5/8″ O.D. Standard Glass *Other sight tube materials available. Consult factory for options. Seals • V = Fluorocarbon • A = Aflas • B = Buna-N • E = Ethylene Propylene • T = PTFE *Other seal materials available. Consult factory for options.
Shield Options - RH, H, MRH, MH, M, & L
Shield Options - RH The Rate/Height shield is used for checking the pump rate of a chemical pump. It is calibrated in QTS/24 Hrs., ML/Min and has a height scale labeled in 1/4″ increments. Shield Options - H The Height shield is marked in 1/4″ Increments and labeled every inch. Shield Options - MRH The Metric Rate/Height shield is calibrated in ML/Min and Liters/24 hrs. The height scale is labeled in 1 CM divisions. Shield Options - MH The Metric Height shield is marked in 1 CM increments and labeled every 5 CM. Shield Options - M The Expanded Metal shield is made from flattened expanded metal and is available in electroplated carbon steel or 304 stainless steel. Shield Options - L The Clear Polycarbonate shield has no markings, and provides 100% visibility as well as environmental protection. Custom Shields KENCO can provide custom scales to meet your needs. The Polycarbonate custom scales are usually engraved and paint-filled. If you are needing scales indicating tank volume or other scale calibrations, please consult the factory. * Note: Gauge assembly does not include KTV Valves. KENCO KTV Valves must be ordered separately. ** Important: Pressure and temperature are dependent on the length of glass and the elastomer chosen. Please consult the factory for minimum and maximum pressure and temperature constraints.